Not a Current Stock Product
Please contact our team for assistance.
Self adhesives
Acrylic
Paper
Techni-Therm III / TP160 @ 1.30 Cwt. / 40#SCK L-3
Datasheet
Facestock
A coated one side thermal transfer facestock with outstanding ink receptivity and print characteristics. It also offers good flexibility and high internal strength for ease in converting. This facestock also offers a 90% brightness and an 82% opacity.
Type
Paper
Tensile MD
25 Lbs/in
Tensile CD
16 Lbs/in
Tear MD
34 Grams
Tear CD
36 Grams
| Properties | Value |
|---|---|
| Basis Weight | 44lbs/3300 sq ft |
| Caliper | 2.65 Mil |
| Opacity | 8.2 |
| Brightness | 90 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
Adhesive
An improved general purpose acrylic adhesive showing good initial tack, shear, and high ultimate adhesion. It has a good plasticizer, UV and solvent resistance, as well as compostability. This adhesive also displays excellent die-cutting and stripping traits & has excellent adhesion to many different substrates, with an application temperature of +25 °F.
Type
Permanent
Shear
79
Min. Application Temperature
25ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
200ºC
| Properties | Value |
|---|---|
| Stainless Steel | 6.8 lbs/linear in. |
| Typical Peel Adhesion | 0lbs/linear in. |
| Polyethylene | 6.5 |
| Corrugated | 1.20 lbs./in. |
| Painted Metal | 6.4 lbs/linear in. |
| Loop Tack | 2.90 oz/in² |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
Backing
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517342
Tensile MD
34
Tensile CD
22
Tear MD
32
Tear CD
34
| Description | Value |
|---|---|
| Basis Weight | 40 |
| Caliper | 2.5 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com