Self adhesives
Hot Melt
SSP 50N
Paper
ScandCoat MC is a medium gloss machine coated paper with good whiteness. It is a versatile paper which is suitable for a very wide range of primary label work. Developed for general colour printing, ScandCoat MC gives good colour lift and can be printed by flexography, rotary or flat-bed letterpress, offset lithography, screen process and can be foil blocked and varnished. It can also be thermal transfer overprinted with suitable smudge resistant ribbons.
Type
Paper
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 78 ± 3g/m² |
| Caliper | ISO 534 | 68 ± 5µ |
| Opacity | ISO 2471 | 89% |
| Brightness | ISO 11475 | 120% |
| Smoothness | ISO 8791-4 - (PPS 10, WS) | 0,9µ |
FSC
Yes
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
General purpose chill permanent
Type
Permanent
Min. Application Temperature
-5ºC
Min. Service Temperature
-40ºC
Max. Service Temperature
70ºC
| Properties | Method | Value |
|---|---|---|
| Peel | FTM 1 (20 min) | 19N |
| Tack | FTM 9 | 18N |
Direct Food
Yes
Indirect Food
Yes
Food contact
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
PET0 is a clear, recycled polyester backing that offers high-speed conversion and consistent dispensing with high durability and resistance to heat. Made from 30% post-consumer recycled plastic, PET0 has a significantly reduced carbon footprint and helps reduce plastic waste in landfills and oceans. PET0 is lightweight, and environmentally friendly, with low energy use. For special dispense applications.
Type
Film
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 23 ± 2µ |
| Description | Value |
|---|---|
| Typical Caliper | 100 ± 10µ |
Format
Roll
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
F120071J0N000
Replaces all previous information.
Last update: 05/12/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty.
2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition.
3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
