Self adhesives
Hot Melt
SSF 933
Paper
FSC ScandTherm TCS SSF 933 HG0
Description
The values indicated in this leaflet are not intended to be a specification but a guide to the values that may generally be expected. Customers should independently determine, prior to use, the suitability of any material for a specific purpose. All information is subject to change without notice.
Datasheet
Facestock
ScandTherm TCS is a protected direct chemi-thermal label, which is a woodfree paper with a coating of thermosensitive dyes which turn black when heated. There is a top coating which protects the label surface and thermally printed images from above, against contaminants such as moisture, oil, grease and plasticisers from films. ScandTherm TCS can be printed by water based and UV inks and varnishes designed for use with direct thermal papers. This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second depending on printer settings. It is recommended that customers assess both the pre-print and the overprint characteristics under end use conditions before proceeding to long runs..
Paper
Black
200 mm/s
Properties | Method | Value |
---|---|---|
Basis Weight | ISO 536 | 75 ± 5g/m² |
Caliper | ISO 534 | 80 ± 8µ |
Regulatory Approval
Yes
Yes
Adhesive
SSF933 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. SSF933 is specially designed for use at low temperature and freezer conditions. For applications on cardboard in temperatures warmer than 0 ºC we recommend the SSP 50N or the SSP 713.
Hot Melt
SSF 933
Permanent
-20ºC
-40ºC
50ºC
Properties | Method | Value |
---|---|---|
FTM 1 | 5,5N | |
FTM 9 | 12N |
Regulatory Approval
Meets composition requirement of indirect food additives regulation FDA 21-CRF 175.105
No
Backing
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Paper
Description | Method | Value |
---|---|---|
Caliper | ISO 534 | 49 ± 3µ |
Transparency | ISO 2469 | 0.5 |
Final product
Roll
Description | Value |
---|---|
Typical Caliper | 139 ± 10% |
Regulatory Approval
The product is registered to SCS-COC-004802 FSC ™ Mix credit.
12 months stored at 20ºC/50% RH
Last update: 01/05/2024
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.