Self adhesives
Hot Melt
SSP 50N
Film
ScandFilm PP60 W TC is a super white opaque polypropylene film with a proprietary cavitated core giving high yield and excellent opacity. It is topcoated with a new versitaile printable coating.
ScandFilm PP60 W TC has a fine balance of flexibility and rigidity to suit most general label dispensing and application requirements.
ScandFilm PP60 W TC G is also a durable material with a very high resistance to moisture and many chemicals.
ScandFilm PP60 W TC is designed for use in pressure sensitive labelling where superior appearance and graphics are desired. Excellent UV printability. ScandFilm PP60 W TC is not recommended for fan folding.
The values indicated in this leaflet are not intended to be a specification but a guide to the values that may generally be expected. Customers should independently determine, prior to use, the suitability of any material for a specific purpose. All information is subject to change without notice.
ScandFilm PP60 W TC is a super white opaque polypropylene film with a proprietary cavitated core giving high yield and excellent opacity. It is topcoated with a new versitaile printable coating. ScandFilm PP60 W TC has a fine balance of flexibility and rigidity to suit most general label dispensing and application requirements. ScandFilm PP60 W TC G is also a durable material with a very high resistance to moisture and many chemicals. ScandFilm PP60 W TC is designed for use in pressure sensitive labelling where superior appearance and graphics are desired. Excellent UV printability. ScandFilm PP60 W TC is not recommended for fan folding..
Type
Film
Top Coating
Yes
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 45,4 ± 3g/m² |
| Caliper | ISO 534 | 60 ± 3µ |
| Gloss | ASTM-D2457 (45° ) | 63 |
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
General purpose chill permanent
Type
Permanent
Composition
Hot Melt
Composition
SSP 50N
Min. Application Temperature
-5ºC
Min. Service Temperature
-40ºC
Max. Service Temperature
70ºC
| Properties | Method | Value |
|---|---|---|
| Peel | FTM 1 (20 min) | 19N |
| Tack | FTM 9 | 18N |
Direct Food
Yes
Indirect Food
Yes
Food contact
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
WG0 White glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment
Type
Paper
| Description | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 60 ± 3g/m² |
| Caliper | ISO 534 | 53 ± 3µ |
| Transparency | ISO 2469 | 0.49 |
| Description | Value |
|---|---|
| Typical Caliper | 121 ± 10% |
Min. Application Temperature
-5ºC
Min. Service Temperature
-40ºC
Max. Service Temperature
70ºC
Format
Roll
Material Shelf Life
12 months stored at 20ºC/50% RH
Last update: 01/05/2024
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.