3.6 MIL POLYART / AP151 @ 1.3 Cwt. / 50#SCK L-3
Pressure-sensitive adhesives
Latex
Film
ITEM #851775
A high performance polyethylene base synthetic paper with a unique computer printable top coating allowing Polyart to be printed with flexo, litho, gravure, letterpress and screen methods. It can also be used with thermal transfer, ion dep and dot matrix.
Type
Film
Tensile MD
6670 Psi
Tensile CD
5510 Psi
Tear MD
496 Grams
Tear CD
599 Grams
Elong MD
120
Elong CD
110
| Properties | Value |
|---|---|
| Caliper | 3.60 Mil |
| Opacity | 90 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
*Please contact your sales representative for details
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Composition
Latex
Shear
80
Min. Application Temperature
35 F
Min. Service Temperature
-65 F
Max. Application Temperature
220 F
| Properties | Value |
|---|---|
| Stainless Steel | 7.3 lbs/linear in. |
| Glass | 5.7 lbs/linear in. |
| Polyethylene | 6.5 |
| Corrugated | 2.50 lbs./in. |
| Painted Metal | 7.0 lbs/linear in. |
| Loop Tack | 5.00 oz/in² |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517353
Tensile MD
40
Tensile CD
24
Tear MD
44
Tear CD
48
| Description | Value |
|---|---|
| Basis Weight | 50 |
| Caliper | 3.2 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com
Our team of experts is ready to assist you and improve your business.
