Pressure-sensitive adhesives
Hotmelt Ru
Film
ScandFilm PP60 W TC is a super white opaque polypropylene film with a proprietary cavitated core giving high yield and excellent opacity. It is topcoated with a new versitaile printable coating.
ScandFilm PP60 W TC has a fine balance of flexibility and rigidity to suit most general label dispensing and application requirements.
ScandFilm PP60 W TC G is also a durable material with a very high resistance to moisture and many chemicals.
ScandFilm PP60 W TC is designed for use in pressure sensitive labelling where superior appearance and graphics are desired. Excellent UV printability. ScandFilm PP60 W TC is not recommended for fan folding.
The values indicated in this leaflet are not intended to be a specification but a guide to the values that may generally be expected. Customers should independently determine, prior to use, the suitability of any material for a specific purpose. All information is subject to change without notice.
ScandFilm PP60 W TC is a super white opaque polypropylene film with a proprietary cavitated core giving high yield and excellent opacity. It is topcoated with a new versitaile printable coating. ScandFilm PP60 W TC has a fine balance of flexibility and rigidity to suit most general label dispensing and application requirements. ScandFilm PP60 W TC G is also a durable material with a very high resistance to moisture and many chemicals. ScandFilm PP60 W TC is designed for use in pressure sensitive labelling where superior appearance and graphics are desired. Excellent UV printability. ScandFilm PP60 W TC is not recommended for fan folding.
Type
Film
Top Coating
Yes
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 45,4 ± 3g/m² |
| Caliper | ISO 534 | 60 ± 3µ |
| Gloss | ASTM-D2457 (45° ) | 63 |
*Please contact your sales representative for details
General purpose, strong permanent adhesive with good chill characteristics. ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticized
Type
Perm
Composition
Hotmelt Ru
| Properties | Value |
|---|---|
| Glass | 0lbs/linear in. |
| Polyethylene | 0 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
FDA 21 CFR 175.105, BfR XIV
No
*Please contact your sales representative for details
WG0 is a White glassine silicone coated liner which allows high-speed converting and consistent dispensing on a wide variety of equipment.
Type
ScandStik liner
| Description | Value |
|---|---|
| Basis Weight | 0 |
| Caliper | 2 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
| Description | Value |
|---|---|
| Typical Caliper | 121 ± 10% |
Format
Roll
Material Shelf Life
12 months stored at 20ºC/50% RH
*Please contact your sales representative for details
Last update: 05/01/2024
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
